Model 705 high speed roll ironing machine

1、烘筒材料选用Q245、厚14mm，热导性好、抗压能力强，对蒸汽的质量依赖性低。

The drying tube material is Q245, its thickness is 14mm, it has the advantages of good thermal conductivity, strong compressive capacity and low dependence on the quality of steam.

2、最高速度为60m/min。

The maximum speed is 60m/min。

3、设计压力为1MPa，检测蒸汽压力1.38MPa，安全性高。

The design pressure is 1MPa, the detection steam pressure is 1.38mpa, so it has a high safety.

4、设计外两层防护，任意一层保护到达上限时蒸汽停止进入、同时泄压，避免安全阀时延的缺陷。

It has two outer layers of protection, either of which stops the steam from entering at the limit and allows it to relieve pressure, thereby avoiding the defect of the safety valve's delay.

5、每个程序有独立的温度控制，根据不同材质的布草设定合适的温度。

Each of its programs carries out independent temperature control, and they set the appropriate temperature according to different materials of cloth.